Tag Archives: improvisation

Improvisation when making crafts

10 Jan

A really important part of all my craft projects is¬†improvisation. I have only a basic set of tools and a table in my room as a “workshop.” Almost every project I undertake requires me to improvise a tool to some degree or another. A perfect example is the project I’m currently working on “Icarus and the sun.”

I wanted to make a sun out of some sheet copper I had lying around, but in order to do that I needed to “dish” the copper. When you “dish” a metal, you are hammering it into a bowl or cone like shape. It’s fairly tricky to do since a flat piece of metal doesn’t want to become a dome. ¬†In order to do this I needed a dish into which I could “dish” my metal. I needed to find something that had the angle of dome I wanted that I could hammer the metal into, but where? I had to improvise.

My first thought was to go down to Lowes and get a pipe cap.

Unfortunately the pipe caps at Lowes were all either PCV or threaded. The PVC ones had walls that were way to high. I would have had to saw through the PVC to cut it down to size, and that would have been a real pain. Defeated, I got back in my car to drive to the craft store to pic up some other things. That’s when I took a sip of my soda and it hit me!

I looked at the bottom of my soda can and noticed it was a dome, however a soda can’s dome was too flimsy and small to suit my needs. What else holds liquid and has a dome at the bottom? A wine bottle! I had plenty of those, and the thick glass is much stronger than flimsy aluminum. (I wasn’t going to be pounding since I was working with thin copper, so glass would work.

Here was an improvised dish, and sure enough it worked!

Improvising tools is half the fun of making crafts.